Most difficulties in working with Micro-Manager arise from configuring the system and from problems/issues with specific devices. In both of these cases you are interacting mainly with device adapters. These device adapters have been written by several different authors, all behave slightly differently, and interact with specific hardware that has its own peculiarities. On these pages we will maintain as much information as possible about Micro-Manager device adapters. This will help you configure and understand your Micro-Manager system. We hope that the authors of the device adapters will maintain this information, but please feel free to update the information here with your own experiences. The information here will refer to the most recent Micro-Manager release.
- Download Qsi Cameras Systems
- Download Qsi Cameras Software
- Download QSI Cameras
- Download Qsi Cameras Wireless
- Download Qsi Cameras App
Atik Cameras are a leading manufacturer of scientific and astrophotography cameras. With over a 15 years of experience in the design and manufacture of cameras for use in the spheres of astrophotography and OEM imaging, Atik Cameras are proud imaging solutions experts. QSI entered the astronomical imaging field around 2007‐8 with a moderate range of cameras which included the QSI583 version 1. Both the QSI583 and QSI683 both employ the KAF8300 sensor (made by Truesense Imaging) with is roughly an APS size sensor. INDI QSI should be able to support all Quantum Scientific Imaging (QSI) 500/600 family of cameras & filter wheels in addition to autoguiding support, whenever applicable. Operation Once you're connected, you can capture images as FITS from the camera, control temperature, and set image binning and frame subset.
Motorized Microscopes
- LeicaDMI - Leica DMI and DM microscopes
- LeicaDMR - Leica DMR microscopes (and DMIRBE)
- MoticMicroscope - Motic BA600 microscopes
- NikonAZ100 - Nikon AZ100 Zoom microscope
- NikonEclipse90i - Nikon Eclipse 90i motorized microscope
- NikonTE2000 - Nikon TE2000 motorized microscope
- NikonTI - Nikon Ti microscope
- NikonTi2 - Nikon Ti2 microscope
- Olympus - Olympus IX81 (Inverted)/BX61 (Upright)
- OlympusIX83 - Olympus IX83 motorized microscope
- ZeissCAN - Zeiss CAN-bus (not CAN29) compatible microscopes (Axiovert 200m, Axioplan2)
- ZeissCAN29 - Zeiss CAN29-bus compatible microscopes (AxioObserver)
- ZeissAxioZoom - Zeiss AxioZoom microscope (CAN29)
Cameras
Download Qsi Cameras Systems
- ABSCamera - Cameras from ABS Gesellschaft für Automatisierung, Bildverarbeitung, Software GmbH Jena
- AmScope - AmScope MU series cameras (Windows)
- Andor - Andor cameras (CCD and EMCCD)
- AndorSDK3 - New model Andor cameras (sCMOS)
- Apogee - Apogee cameras
- AxioCam - Zeiss AxioCam medium resolution and high resolution models (Windows)
- BaslerAce - Basler Ace USB Cameras
- BaslerCameras - All Basler cameras that are supported by pylon SDK
- BaumerOptronic - Leica DFC camera (through BaumerOptronic FXLib)
- BiostepEagleIce - biostep EagleIce camera
- dc1394 - Firewire cameras that adhere to the iidc1394 specs (see also IIDC)
- DECamera - Direct Electron Cameras
- DemoCamera - Virtual, emulated equipment for testing
- Dhyana - Dhyana/Tucsen cameras
- DSLRRemoteCamera - Canon DSLR cameras (Windows)
- FakeCamera - Virtual camera that loads images from disk (Windows, Linux)
- FirstLightImagingCamera - First Light Imaging Cameras
- FLICamera - Finger Lakes Instrumentation Cameras
- GigECamera - GigE Vision- and GenICam-compliant cameras
- GPhoto - Canon and Nikon DSLR cameras (Mac, Linux)
- Hamamatsu - Legacy adapter for Hamamatsu cameras (via DCAM-API); now Mac only
- HamamatsuHam - Hamamatsu cameras (via DCAM-API)
- IDS_uEye - IDS uEye USB cameras (also Thorlabs DCUxxxx, Edmund EO-xxxxM) (Linux, Windows)
- IIDC - Firewire (and USB) cameras compatible with the IIDC specification (see also dc1394)
- JAI - JAI Cameras (eBUS)
- Leica Cameras - These use the BaumerOptronic adapter
- Lumenera - Lumenera cameras
- MATRIX VISION devices - MATRIX VISION GmbH USB3 Vision, GigE Vision and USB2 cameras as well as various frame grabber boards
- Micropix - Cameras from Micropix
- Mightex_C_Cam - Mightex C-series USB cameras
- MoticCamera - Motic cameras
- NKRemoteCamera - Nikon Digital SLR (Windows)
- OpenCVgrabber - Supports numerous USB cameras and frame grabbers (those using a DirectShow or WDM class driver). (Windows)
- PCO_Camera - Supports all pco.sdk based cameras (pco.edge, pco.panda and others)
- Photometrics - A.k.a. PVCAM
- PICAM - Princeton Instruments cameras using the PICam interface
- Piper - Stanford Photonics cameras
- Pixelink - Pixelink Cameras
- Point Grey Research - Point Grey (now FLIR) cameras through the Flycap2 interface, also see Spinnaker
- PrincetonInstruments - Princeton Instruments cameras
- ProgRes - Jenoptik cameras (ProgRes series)
- PSRemoteCamera - Canon PowerShot camera (Windows)
- PVCAM - Roper/Photometrics cameras (not for Princeton Instruments)
- QCam - QImaging cameras
- QSICamera - QSI cameras (Windows)
- RaptorEPIX - Raptor Photonics cameras using EPIX cameralink board
- ScionCam - Scion cameras
- Sensicam - PCO/Cooke Sensicam camera
- SigmaKoki - Sigma Koki camera
- Spinnaker - FLIR (formally Point Grey) cameras though the Spinnaker interface
- SpotCamera - Diagnostic Instruments Spot cameras
- TetheredCam - Canon and Nikon DSLR cameras (Windows)
- ThorlabsUSBCamera - Thorlabs cameras (Windows)
- TIScam - The Imaging Source cameras (tested on USB/CCD models) and video frame grabbers
- TSI - Thorlabs Scientific Imaging Cameras
- TwainCamera - Cameras fully implementing Twain Imaging Standard
- Veroptics - Veroptics cameras
- Video4Linux - Video4Linux compatible cameras
- XIMEACamera - XIMEA cameras (and some Olympus Soft Imaging cameras)
Stages, filter wheels, shutters
- ArduinoNeoPixel - Adafruit NeoPixel RGB LEDs controlled through an Arduino
- ASIFW1000 - ASI Shutter and Filter Wheel controller
- ASIStage - ASI XY (and Z) stage and CRIF
- ASITiger - ASI TG-1000 'Tiger' Controller (hub device, peripherals include multiple stage types, filter wheel, shutters, micro-mirrors, etc.)
- ChuoSeiki_MD5000 - ChuoSeiki MD5000 series controller: 2-axis, single axis
- ChuoSeiki_QT - ChuoSeiki QT series controller: 3-axis, 2-axis, single axis
- CoolLED - LED illuminator (usable as a shutter device)
- CONEX - See NewportCONEX
- Conix - Conix Filter Changer, XY and Z stage
- Corvus - Märzhäuser XY stages with Corvus driver.
- DA-Z-Stage - For stages that can be controlled with analogue voltage. Needs a DA device
- DAShutter - Treats a DA output as a shutter. Useful (for instance) for diode lasers
- IntelLiDrive - IntelLiDrive stages are support through 3d party adapters
- KDV - kdvelectronics focus drive (z-stage) for Meiji Techno
- LeicaDMSTC - Leica DMSTC XY stage
- LMT200-V3 - ITK Dr. Kassen LMT200-V3 HYDRA Controller and XY stage
- Ludl - Ludl stages, shutters and filter wheels
- LudlLow - Ludl stages, shutters and filter wheels (other)
- Marzhauser - Märzhäuser XY stages and Z (uses TANGO controller)
- MarzhauserLStep - Märzhäuser LStep stage controller
- MarzhauserLStepOld - Old version (1.2) of Märzhäuser LStep stage controller
- MCL_MicroDrive - Mad City Labs MicroDrive
- MCL_NanoDrive - Mad City Labs NanoDrive
- MT20 - Olympus MT20 illumination source (Lamp/shutter/filter wheel)
- MP285 - Sutter Micro-Manipulator
- NewportCONEX - Newport CONEX-CC servo controller
- NewportSMC - Newport SMC100 single-axis motor controller
- Nikon - Nikon Z-drive, TIRF shutter and IntensiLight shutter
- NIMotionStage - National Instruments FlexMotion stage controls
- NPointC400 - nPoint C.400 and LC.400 axis controllers
- ObjectiveImaging - Objective Imaging OASIS controller
- PI_GCS_2 - Physik Instrumente (PI) GCS2 adapter
- PI_GCS - Physik Instrumente (PI) GCS adapter - Z Stage connected to PI GCS controller (E-665, E-621, E-625, E-753, ..)
- PI - Other (older) Physik Instrumente devices. Includes the E-662 controller
- PicardStage - Picard Industries USB Slide I/II and USB Twister
- PIEZOCONCEPT - PIEZOCONCEPT nanopositioners
- Piezosystem_30DV50 - Piezosystem Jena. digital one channel controller
- Piezosystem_dDrive - Piezosystem Jena. digital 6 channel controller with display
- Piezosystem_NV40_1 - Piezosystem Jena. one channel controller for older stages
- Piezosystem_NV40_3 - Piezosystem Jena. 3 channel controller with USB
- Piezosystem_NV120_1 - Piezosystem Jena. 1 channel controller with USB
- PrecisExcite - LED illuminator (usable as a shutter device)
- Prior - Prior stages, shutters, and filter wheels
- PriorNano - Prior/Queensgate nanopositioning stages
- RAMPS - RepRap RAMPS board as a stage controller
- Scientifica - Scientifica stages
- ScopeLED - DiCon LED-powered brightfield and fluorescence microscopy illuminators, implemented as shutters.
- SigmaKoki - Sigma Koki stages and shutters
- SmarActHCU-3D - HCU and CU SmarAct controllers adapter (XY and Z)
- SouthPort_MicroZ - SouthPort MicroZ stage controller
- Standa - Standa Microstep Driver
- StandaStage - Standa Microstep Driver
- Standa8SMC4 - Standa Microstep Driver (using XIMC interface)
- SutterLambda - Sutter Shutters, filter wheels, light sources, etc.
- SutterLambda2 - Sutter Lambda 10-3 controller, shutters, filter wheels, and VF5 tunable filter
- SutterStage - Sutter XY Stage
- Thorlabs - Thorlabs XY Stage (brushless DC motor), Piezo Z Stage and Integrated Filter Wheel
- ThorlabsAPTStage - Thorlabs APT family linear stages
- ThorlabsDCStage - Thorlabs Linear Stages using the TDC001 Controller (see also: ThorlabsAPTStage)
- ThorlabsDCxxxx - Thorlabs LED controllers
- ThorlabsElliptecSlider - Thorlabs Elliptec sliders ELL6, ELL9, ELL17 and ELL20.
- ThorlabsFilterWheel - Thorlabs Filter Wheel
- ThorlabsMFC1 - Thorlabs MFC1 Motorized Microscope Focus Controller
- ThorlabsSC10 - Thorlabs shutter controller
- Tofra - XY and Z stages, filter wheel, motorized filter cube slider, and LED illuminator
- UserDefinedSerial - Shutters and state devices that can be controlled with simple serial commands
- Vincent - Vincent Uniblitz controllers
- WieneckeSinske - WSB PiezoDrive CAN XY stage
- Xcite - EXFO X-Cite 120 PC Fluorescent Lamp / Shutter
- XCite120PC_Exacte - Lumen Dynamics X-Cite 120PC and exacte adapter
- XCiteLed - LED controller
- XCiteXT600 - X-Cite TURBO and XT600 series
- Zaber - Zaber linear and XY stages, filter wheels
Communication ports, TTLs, DAQs, etc.
- Arduino - Open Source Programmable Digital/Analogue IO board
- Arduino32bitBoards - 32bit Open Source Programmable Digital/Analogue IO boards
- CustomArduino - Arduino-based devices matching existing device adapters
- DTOpenLayer - DT OpenLayer Digital IO boards
- ESIOImagingControllers - Microcontrollers for hardware triggering and synchronization
- FreeSerialPort - Communicate directly through a serial port
- ITC18 - controls shutters, cameras, pifocs, anything that can use either a TTL signal or a ±10 V signal
- K8055 - Velleman Digital IO board (all platforms)
- K8061 - Velleman Digital IO board (all platforms)
- MCCDAQ - Measurement Computing PCI-DDA08/16
- National Instruments - See NI100X and NIMultiAnalog
- NicoLase An open-source diode laser combiner, fiber launch, and sequencing controller for fluorescence microscopy
- NI100X - NI I/O boards - DAQmx interface
- NIMultiAnalog - NI boards with multiple analog outputs
- SerialManager - Serial Ports on Windows
- SerialManagerUnix - Serial Ports on Mac and Linux
- TriggerScope - TriggerScope digital and analog controller
- TriggerScopeMM - TriggerScope v3 with Micro-Manager firmware
- ParallelPort - TTLs on parallel port (Windows only)
- USBManager - Micro-Manager internal USB communications driver
Download Qsi Cameras Software
Light sources
Download QSI Cameras
- AgilentLaserCombiner - Agilent MLC
- AndorLaserCombiner - Andor laser launch
- BlueboxOptics_niji - Bluebox Optics niji 7 channel LED light source
- CoboltOfficial - Cobolt lasers 06-01 Series, Cobolt Skyra
- Cobolt - Cobolt laser controller
- CoherentCube - Coherent CUBE laser controller
- CoherentOBIS - Coherent OBIS laser controller (Single Laser Remote)
- Coherent Scientific Remote - Coherent OBIS laser controller (Scientific Remote and Single Laser Remote)
- LaserQuantumLaser - gem/ventus/opus/axiom series from LaserQuantum
- Lumencor Light Engine - All Lumencor Light Engine models
- LumencorSpectra - Solid state illuminator from Lumencor
- Mightex - LED driver/controllers
- Mightex_BLS - BLS Control Modules
- MightexPolygon - Mightex Polygon multiwavelength patterned illuminators
- Omicron - Omicron Laser Controller
- Oxxius - Oxxius Laser Controller
- Oxxius_combiner - Oxxius combiner; hub for multiple laser sources
- PolychromeV - Illumination system from Till Photonics
- Prairie Aurora Laser Launch - Prairie Aurora Laser Launch Interfacing using a Velleman K8061
- Sapphire - Lasers from Coherent
- Skyra - Skyra laser controller
- Stradus - Vortran Stradus laser driver
- Toptica_iBeamSmartCW - Toptica iBeamSmart laser series
- Toptica_iChrome_MLE - Toptica iChrome Multi Laser Engine
- Toptica_iChrome_MLE_TCP - Toptica iChrome Multi Laser Engine over TCP link
- USB_Viper_QPL - Excelitas/Qioptiq iFLEX-Viper Laser Engine
- Versalase - Vortran Versalase laser driver
- YodnLighting - YODN Lighting lamp device adapter for E600 serial products
Other devices
- AAAOTF - AOTF controller from AA Optoelectronics
- Aladdin - Syring pump controller from Aladdin
- AndorShamrock - Andor Shamrock Spectrographs
- Aquinas - Aquinas Microfluidics Controller
- AOTF - NEOS AOTF control through parallel port. Can be used for any TTL-controllable shutter
- ASIwptr - ASI well-plate transfer robot
- CARVII - BD/CrEST CARV II spinning disk confocal
- Diskovery - Spectral/Andor spinning disk confocal/TIRF module
- DLP4000 - Digital Mirror Device
- GenericSLM - Any spatial light modulator that can be controlled via computer video output port.
- ImageProcessorChain - Virtual device driver for processing images in C++
- LumencorCIA - Camera synchronization for the Lumencor Spectra
- MaestroServo - Pololu Maestro Servo controller
- MicroPoint - Galvo-based phototargeting device from Andor
- Mosaic3 - Andor Mosaic DMD Projection Device
- Okolab - Okolab Microscope Incubators and Gas Controllers
- OVP_ECS2 - Optic Valley Photonics ECS-2 environmental controller
- Pecon - Pecon Incubation System
- PeCon2000 - PeCon 2000 Incubation Controllers (USB-connected)
- pgFocus - Open Software/Hardware Focus Stabilization from BIG
- Rapp - Rapp UGA40 photobleaching/photoactivation unit
- SimpleAutofocus - Image-based autofocus software 'device'.
- SpectralLMM5 - Spectral laser line controller
- SutterMPC - Multi manipulator controller
- Utilities - Virtual devices providing extra functionality to Micro-Manager
- VariLC - Tunable liquid crystal polarization modulators from CRi
- VisiTech_iSIM - VisiTech iSIM
- Yokogawa - Yokogawa CSU22
- Yokogawa CSUW1 - Yokogawa CSUW1
- Yokogawa CSUX - Yokogawa CSUX
- XLight - CrestOptics X-Light spinning disc confocal system
- The HSi-300 Hyperspectral Imager can be controlled with Micro-Manager (not yet included in the distribution, contact Gouch & Housego for details)
Retrieved from 'https://micro-manager.org/w/index.php?title=Device_Support&oldid=11823'
Download Qsi Cameras Wireless
New and upcoming QSI drivers
Download Qsi Cameras App
#26234 Hello, SGPro posted the following message: http://forum.mainsequencesoftware.com/t/attention-qsi-owners/10547 Anyone know what this means? Will several capture software have to update their software? How much of the new QSI driver will impact on capture software programs? Thanks, Peter |
#26235 Netgear modems driver. What I wonder is this – why doesn’t QSI post announcements like this to this forum. I don’t think we should have to find out about QSI’s plans from other vendors. Forgive me for saying so but I long for the days when Kevin Nelson ran this forum and QSI was based here in the United States. From: QSI-ccd@.. Sent: Thursday, October 3, 2019 2:50 PM To: QSI-ccd@.. Subject: [QSI-ccd] New and upcoming QSI drivers Hello, SGPro posted the following message: Anyone know what this means? Will several capture software have to update their software? How much of the new QSI driver will impact on capture software programs? Thanks, Peter |
#26236 It would appear that this only applies to users of SGPro. So for the rest of us, if it ain't broke, don't fix it! toggle quoted messageShow quoted textCheers, Peter http://www.madpc.co.uk/~peterv Approx. 55ºN, 2ºW (Northumberland, UK) On 03/10/2019 19:50, pnagy@sbcglobal.net [QSI-ccd] wrote: Hello, |
#26237 That's what I am hoping. I migrated from SGPro to Voyager. I find Voyager a much better automation software than SGPro mainly because it has much better auto focusing feature. Peter ---In QSI-ccd@.., <petevasey@..> wrote : It would appear that this only applies to users of SGPro. So for the rest of us, if it ain't broke, don't fix it! Cheers, Peter http://www.madpc.co.uk/~peterv Approx. 55ºN, 2ºW (Northumberland, UK) On 03/10/2019 19:50, pnagy@.. [QSI-ccd] wrote: |
#26238 Just to clarify things and provide a bit of history. I started this group and because I personally knew Kevin Nelson and QSI I invited them to participate. And the current owners are invited to participate. Whether any of them do or not is up to them. This has always been a non-official support forum with user participation. That is why people are encouraged to get direct support from the manufacturer for some things, but users can provide a wealth of information. This forum is a valuable resource because the members have made it that way. I still run it, although do not always respond to messages I do read them on a daily basis. I am still a QSI camera owner and user. I am very happy with the help that is generously provided here by the members and they make this an easy forum to maintain. So it would be really nice for Atik to post more about what the plans are and status of QSI but it is up them to do it. Alan |
#26239 Thank you for the clarification Alan. It is great to har from you. From: QSI-ccd@.. Sent: Friday, October 4, 2019 8:50 AM To: QSI-ccd@.. Subject: RE: [QSI-ccd] New and upcoming QSI drivers Just to clarify things and provide a bit of history. I started this group and because I personally knew Kevin Nelson and QSI I invited them to participate. And the current owners are invited to participate. Whether any of them do or not is up to them. This has always been a non-official support forum with user participation. That is why people are encouraged to get direct support from the manufacturer for some things, but users can provide a wealth of information. This forum is a valuable resource because the members have made it that way. I still run it, although do not always respond to messages I do read them on a daily basis. Option driver download for windows 7. I am still a QSI camera owner and user. I am very happy with the help that is generously provided here by the members and they make this an easy forum to maintain.
So it would be really nice for Atik to post more about what the plans are and status of QSI but it is up them to do it. Alan |
#26250 Sorry we haven’t been more involved in this group, we do however check it regually to see what is being discussed. QSI is in good shape! We are taking orders for the long awaited QSI6162 camera with the KAF 16200, https://qsimaging.com/products/600-series/qsi-6162/ We have taken the first image with the prototype of this camera, https://www.cloudynights.com/topic/677612-ic1396-take-with-qsi6162-prototype/#entry9662364 The updated drivers mentioned in this post refer to an update of the QSI ASCOM drivers that are required for the version of SGP that we ship with new cameras and for the latest version of SGP. The updated ASCOM drivers are fully ASCOM compliant and fix some issues users had with the old ASCOM drivers. The visible changers are a new ASCOM properties box and in the ASCOM selection box the QSI camera is now listed as ‘QSI Camera’ instead of ‘QSI CCD Camera’, this caused a problem with QSI version of SGP which looked for ‘QSI CCD Camera’ only. We will include a short guide for the new ASCOM setup once we release it. We will announce when the new drivers are available, they will be downloadable from our website, https://qsimaging.com/drivers-software/ If you have any concerns please email us at support@.. Best regards |
#26251 Why did you change the description of camera type? This can complicate many capture software programs. Why not stick to same camera type and not force users to download your latest drivers just to change camera type? That does not seem fair to the consumers. It appears that not every capture software developers were notified like Voyager. Voyager is one of the best automation software I've ever used and if you caused problems to Voyager, then I suggest you to notify Voyager ASAP because Voyager is infinitely much better than SGP. Peter ---In QSI-ccd@.., <vincecom@..> wrote : Sorry we haven’t been more involved in this group, we do however check it regually to see what is being discussed. QSI is in good shape! We are taking orders for the long awaited QSI6162 camera with the KAF 16200, https://qsimaging.com/products/600-series/qsi-6162/ We have taken the first image with the prototype of this camera, https://www.cloudynights.com/topic/677612-ic1396-take-with-qsi6162-prototype/#entry9662364 The updated drivers mentioned in this post refer to an update of the QSI ASCOM drivers that are required for the version of SGP that we ship with new cameras and for the latest version of SGP. The updated ASCOM drivers are fully ASCOM compliant and fix some issues users had with the old ASCOM drivers. The visible changers are a new ASCOM properties box and in the ASCOM selection box the QSI camera is now listed as ‘QSI Camera’ instead of ‘QSI CCD Camera’, this caused a problem with QSI version of SGP which looked for ‘QSI CCD Camera’ only. We will include a short guide for the new ASCOM setup once we release it. We will announce when the new drivers are available, they will be downloadable from our website, https://qsimaging.com/drivers-software/ If you have any concerns please email us at support@.. Best regards |
#26252 I have the latest SGP version installed but the previous QSI driver. Does this mean that I will not be able to use my QSI camera until you make the new driver available? Or, can I continue to use the old driver? I saw a message pop up but I found it to be confusing. Thank you for the clarification. Best Regards, |
#26255 Hello Peter, The change was made for several reasons, dropping the ‘CCD’leaves the door open for future QSI CMOS cameras, it also brings the name intoline with our existing ASCOM drivers. The only real issue is going to be withthe version of SGP that is locked to QSI only cameras which is supplied withnew QSI cameras, you would need the latest version of SGP. No other softwareshould be affected apart from the name change. Voyager does look like an interesting program, it has nativeQSI driver compatibility as well as ASCOM so the only change you would need tomake if you are using the ACSOM connection would be to change the camera nameto ‘QSI Camera’ Best regards Vince |
#26256 Hello Ben, Do you have the full version of SGP? If so, the only changethat you need to make is the name change in the ASCOM if you choose to installthe latest QSI software. Best regards Vince |
#26261 I'm still a little confused about what's going on with the drivers. I have the retail version of SGP and drivers from 2017 I think. All work fine on my Windows 7 installation. As I read the thread, if I choose to upgrade my current version of SGP (the latest release, not the beta), I'll have to update the QSI drivers. Right? If that's the case, have they been tested on Windows 7? I hate to update just for the sake of a name change. |
#26263 Hello John, Sorry for the confusion, as it stands you need to do nothing. If you decided to update the QSI drivers to the latest version all you would have to do is select 'QSI camera' instead of 'QSI CDD camera' If you updated to the current version of SGP you wouldn't need to do anything. The update is really for the users of SGP that is tied to work with only QSI cameras. Best regards |
#26266 New QSI drivers appear to be problematic. See http://forum.mainsequencesoftware.com/t/new-qsi-ascom-drivers-available/10645 Peter |
